QMS 1060 Specifications download pdf (Page 80)

If you experience problems when printing a job using NetWare with a

banner page, change the Administration/Communications/Network 2/

CrownNet/PS Protocol value to QBinary or QBinary Fixed.

Check the cable connecting the printer and the host. You could

have the wrong kind of cable, or your printer may not be config-

ured for the correct cable and port.

Make sure no one pressed the Cancel key while your job was

printing.

Check the control panel message window to see if the cassette or

multipurpose tray is out of paper.

Check to see if a jam has occurred during the print job.

If you have manually set the orientation (landscape or portrait) through

the control panel and your image doesn’t print correctly, you may be

experiencing an orientation problem. The preferred method to set

orientation is through your application.

If you receive a PostScript error when printing a file that previ-

ously printed correctly on another PostScript printer, check the

“Other Problems” section that follows for a solution. If no solution

is found, then call your QMS vendor for additional error informa-

tion.

If you receive a PostScript error when printing a new file from a

new application, check the “Other Problems” section that follows

for a solution. If no solution is found, see the

PostScript Lan-

guage Reference Manual

(Adobe Systems, Inc., Reading, MA:

Addison-Wesley, 1990, ISBN 0-201-18127-4), or call your QMS

vendor for additional error information.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

No comments

QMS 1060 Specifications Page 80