QMS 3260 Specifications Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 194
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
+&#
#

/##

 !"
1 Place your envelopes on a flat surface,
and flatten them by pressing down the
corners.
2 Flex the envelope stack (including the
edges) to remove any stiffness.
3 Correct any dog-eared corners, and
then tap the envelopes on a flat sur-
face to align them.
Formatting
Your printer receives the instructions to print on envelopes from your application.
When formatting data for envelopes, leave at least a 0.16" (4.06 mm) margin
from the edges of the envelope.
Print on the front side only. Some parts of the envelope consist of three layers
of paper—the front, back, and flap. Anything printed in these layered regions
may be lost or faded.
See your application documentation for specific information on printing enve-
lopes.
Input Source
Envelope feeder; multipurpose tray
Capacity
Up to 10 for the multipurpose tray and up to 100 for the envelope
feeder, depending on the thickness of the envelopes
Type
Refer to the specifications in chapter 4, “Print Media,” in the
Reference
manual
.
Notes
Use envelopes with a smooth exterior surface. Envelopes with a rough sur-
face may jam in the media tray.
You can print only on the address side of the envelope.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 193 194

Comments to this Manuals

No comments