QMS 3260 Specifications download pdf (Page 60)

0&

$&



0"2++

At any time during active printing you can remove you jobs from the output bins by

pressing the Unload button on top of the HCOS. The printer will bring the bins to the

top-stack position after completion of a set and stop printing. After you remove your

jobs from the bins press the Unload button again (LED turns off) to allow the printer to

resume printing. If you don’t press the Unload button within sixty seconds the printer

will automatically begin printing again.

»Note:

When removing paper from the output bins, you must remove all the sheets

from the tray for the printer to be able to update the counter on the bin. For example, if

the bin was full at 670 sheets and you removed all but 1 sheet, the printer would still

think the bin was filled with 670 sheets. This includes the capacities shown on the

Print Statistics page and the “gas gauge” indicators on the CrownView printer

webpage.

211

This option offsets each job as they are stacked in the optional tray. Each job will be

offset by 20 mm (3/4").

Operator Control/Offset Stacking

Choices

Off, On

Off—Jobs stack normally.

On—Each job is offset in the output tray.

Default

Off

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 193 194

No comments

QMS 3260 Specifications Page 60