QMS 4032 Specifications download pdf (Page 102)

,%

((

"

Print density is the amount of toner placed on each dot, making the print appear

lighter or darker. The higher the density, the darker the print looks and the higher the

contrast is on the page.

»Note:

If the print density is too light, make sure that the Administration/Engine/Print

Quality/Normal option is turned on before making any adjustments. The Conserve

Toner option saves toner by simulating draft-quality printing.

%"'

Use Administration/Engine/Rotate Simplex to select rotate simplex.

Choices

15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours—Idle time before

activation of low-power state.

Off—Use normal power all of the time.

Default

1 hour

Notes

When a print job is received, the printer returns to normal power within 90

seconds.

Administration/Engine/Toner Density

Choices

1-7

Default

Administration/Engine/Rotate Simplex

Choices

On, Off

Default

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 233 234

No comments

QMS 4032 Specifications Page 102