QMS 4032 Specifications download pdf (Page 149)

,2 

#$!"#$# 

2

1 Set the end job mode from the printer’s control panel.

2 Create a job separator to append an EOD command and send it between

each print job.

*>##

If you use a print queuing system other than a computer print server and you experi-

ence what appears to be an EOD command problem, you may need to use another

procedure, such as a print utility, an initialization sequence, or a header page to add

an EOD command. See your print queuing system documentation, your network

administrator, or your QMS vendor for more information.

"+:!

Use the following procedure to set the end job mode from the printer’s control panel

for printers connected via the serial or parallel interface to a stand-alone computer, a

print server, or some other type of print queuing system:

»Note:

If you print both serial and parallel protocol jobs, then you must set the end job

mode for each protocol.

Wait for the printer to go idle, and then press the control panel keys in the order shown

in the following instructions to access the End Job Mode option. The printer responds

by displaying a status message in the message window.

»Note:

You may need to press the Next key more than once to advance through the list

of selections or options.

Key Purpose Message Window

Online

Turns off the Online indicator and

readies the printer for configuration.

IDLE

Accesses the configuration menu.

CONFIGURATION

OPERATOR CONTROL

Advances to the Operator Control/

Administration menu.

CONFIGURATION

ADMINISTRATION

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 233 234

No comments

QMS 4032 Specifications Page 149