QMS 4032 Specifications download pdf (Page 70)

,$#

&

5"

Sets the default lines printed per inch in PCL jobs, regardless of page size.

5

Indicates the default line termination mode. This setting specifies the treatment of line

feeds and carriage returns. (See Appendix C, “Document Option Commands,” for

more information on line termination).

6

Sets the point size for scalable default fonts in units of hundredths of a point. For

example, a 24 point default point size is selected by entering 2400. The smallest incre-

ment allowed in point size is .25 point (for example, 8.5 point and 8.75 point fonts are

allowed, but 8.6 point is not).

Administration/Emulations/PCL 5e/Lines/Inch x100

Choices

0100 to 4800 (lines/inch x 100)

Default

0600 (lines/inch x 100)

Notes

You must enter the number of lines per inch times 100. For example, 6

lines per inch is entered as 0600; 6.6 lines per inch is entered as 0660.

Administration/Emulations/PCL 5e/Line Termination

Choices

CR=CR LF=LF

CR=CR+LF LF=LF

CR=CR LF=CR+LF

CR or LF=CR+LF

Default

CR=CR LF=LF

Administration/Emulations/PCL 5e/Point Size x100

Purpose

Sets the point size for scalable default fonts increments of .01 point. For

example, a 24 point default point size is selected by entering 2400. The

smallest increment allowed in point size is .25 point. For example, 8.5

point and 8.75 point fonts are allowed, but 8.6 point is not.

Choices

00025-99975 (0.25-999.75 points)

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 233 234

No comments

QMS 4032 Specifications Page 70