QMS 4032 Specifications download pdf (Page 56)

#





Menu Administration/Communications/Serial/PS Protocol

Purpose Sets the binary communications protocol (BCP) for communicating over a

serial interface to a PostScript printer.

Choices Normal—Enables standard, ASCII (7-bit) hex protocol. Data is sent and

received in ASCII format. This mode is recommended if you do not

print binary data. It was designed for data in the printable ASCII

range. Print jobs can change this setting through PostScript

operators.

Normal Fixed—Enables standard, ASCII (7-bit) hex protocol. Print jobs

cannot change this setting through PostScript operators.

Binary—Enables binary communications protocol (BCP). Print jobs can

change this setting through PostScript operators. Data in the printable

ASCII range also prints.

Binary Fixed—Enables binary fixed communications protocol (BCP). Print

jobs cannot alter change this setting through PostScript operators.

Data in the printable ASCII range also prints.

Default Normal

Notes See chapter 3, “Additional Technical Information,” for a full discussion of

PS Protocol.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 233 234

No comments

QMS 4032 Specifications Page 56